Print-Ready Technology Realization
All generated models have undergone a fourfold print optimization process: 1) automatically generate a base plane of 0.5mm thickness as the print base; 2) maintain a minimum feature size of 3mm or more to avoid the risk of fracture; 3) use a watertight mesh topology to prevent slicing errors; and 4) pre-set the recommended support structure loci. The platform's recommended combination of printing parameters (PLA material/0.15mm layer thickness/20% fill rate) has been validated and tested with mainstream printer models.
Technical documentation shows that unmodified models have a first-punch success rate of 92% on common devices such as the Creality Ender-3. For special needs, the platform offers an Expert Mode that allows adjustment of 1) mesh subdivision level (0.1-1.0mm), 2) base thickness (0-10mm), and 3) detail enhancement factor (1-3x). These parameters balance print time and detail performance.
This answer comes from the article3D Bust Maker: Generating 3D Printed Busts from a Single PhotoThe
English 
简体中文 
日本語 
Deutsch 
Português do Brasil